Wet Sounds Tower Speaker Adapters / Clamps / Spacers

DESCRIPTION

#ADPCENTURIONMAXIMUS 

Centurion Maximus Tower Adapters for installation of 1 pair of tower speakers in the top factory locations. CNC Machined from billet aluminum to assure a perfect OEM fit. Compatible with REV 10X, REV 8X and ICON 8X and for full swivel and quick disconnect options, the REV 10 SXM, REV 8 SXM and ICON 8 SXM using the removable flat base mount of the TC3 swivel clamps. Available in Gloss Black powdercoated finish. Mounting bolts included.

DESCRIPTION

#ADPFTTOPW

Wet Sounds Tower Speaker Brackets for Fiberglass T-Top Mounts (White - Pair)

DESCRIPTION

#ADPGLADIATORB

Centurion Gladiator Tower Adapters for installation of 1 pair of tower speakers in the top factory locations. CNC Machined from billet aluminum to assure a perfect OEM fit. Compatible with REV 10X, REV 8X and ICON 8X and for full swivel and quick disconnect options, the REV 10 SXM, REV 8 SXM and ICON 8 SXM using the removable flat base mount of the TC3 swivel clamps. Available in a powdercoated Black, or Polished finish. Mounting bolts included.

DESCRIPTION

#ADPGLADIATORP

Centurion Gladiator Tower Adapters for installation of 1 pair of tower speakers in the top factory locations. CNC Machined from billet aluminum to assure a perfect OEM fit. Compatible with REV 10X, REV 8X and ICON 8X and for full swivel and quick disconnect options, the REV 10 SXM, REV 8 SXM and ICON 8 SXM using the removable flat base mount of the TC3 swivel clamps. Available in a powdercoated Black, or Polished finish. Mounting bolts included.

DESCRIPTION

#ADPILLUSIONDXT

Malibu Illusion DXT Tower Adapters for installation of 1 pair of tower speakers in the top factory locations. CNC Machined from billet aluminum to assure a perfect OEM fit. Compatible with REV 10X, REV 8X and ICON 8X and for full swivel and quick disconnect options, the REV 10 SXM, REV 8 SXM and ICON 8 SXM using the removable flat base mount of the TC3 swivel clamps. Available in a powdercoated Black finish. Mounting bolts included.

DESCRIPTION

#ADPMALIBUG3BIMINIBARB

If you have a bimini on your Malibu G3 Tower and are adding a pair of Wet Sounds tower speakers, you'll need the Wet Sounds G3 Bimini Relocation Brackets to fit your new speakers. The Malibu G3 Bimini Relocator Brackets make room for mounting tower speakers on your Malibu G3 wakeboard tower. For use with Malibu G3 Single Tower Speaker Adapters.

DESCRIPTION

#ADPMALIBUG3DUALB

Tower Speaker Brackets For The Malibu G3 Dual Speaker Mount.

DESCRIPTION

#ADPMALIBUG3SINGLEB

Malibu G3 Single Tower Adapters for installation of 1 pair of tower speakers in the top factory locations. CNC Machined from billet aluminum to assure a perfect OEM fit. Compatible with REV 10X, REV 8X and ICON 8X and for full swivel and quick disconnect options, the REV 10 SXM, REV 8 SXM and ICON 8 SXM using the removable flat base mount of the TC3 swivel clamps. Available in a powdercoated Black, or Silver finish. Mounting bolts included.

DESCRIPTION

#ADPMALIBUG3SINGLEP

Malibu G3 Single Tower Adapters for installation of 1 pair of tower speakers in the top factory locations. CNC Machined from billet aluminum to assure a perfect OEM fit. Compatible with REV 10X, REV 8X and ICON 8X and for full swivel and quick disconnect options, the REV 10 SXM, REV 8 SXM and ICON 8 SXM using the removable flat base mount of the TC3 swivel clamps. Available in a powdercoated Black, or Polished finish. Mounting bolts included.

DESCRIPTION

#ADPMALIBUG5G

These model specific adapters are for installation of 1 pair of Wet Sounds tower speakers onto factory locations of the 2021 Malibu G5 Tower. CNC Machined from billet aluminum to assure a perfect OEM fit. Available in a brushed metal finish. For use with REV 10X, REV 8X and ICON 8 only. Mounting hardware included.

DESCRIPTION

#ADPMCBRACKET11

Mastercraft MC-11 Tower Adapters for installation of 1 pair of tower speakers in the top factory locations. CNC Machined from billet aluminum to assure a perfect OEM fit. Compatible with REV 10X, REV 8X and ICON 8X and for full swivel and quick disconnect options, the REV 10 SXM, REV 8 SXM and ICON 8 SXM using the removable flat base mount of the TC3 swivel clamps. Available in a smooth brushed metal finish. Mounting bolts included.

DESCRIPTION

#ADPNAUFCTA

These model specific adaptors are for installation of 1 pair of Wet Sounds tower speakers onto the 2019+ Nautique Flight Control Tower Actuated (FCTA). CNC Machined from billet aluminum to assure a perfect OEM fit. Available in a blasted metal finish. For use with REV 10X, REV 8X and ICON 8 only. Mounting hardware included.

DESCRIPTION

#ADPNAUTIQUEFC5L

Nautique FC5 Lower Tower Adapters for installation of 1 pair of tower speakers in the factory locations. CNC Machined from billet aluminum to assure a perfect OEM fit. Compatible with REV 10X, REV 8X and ICON 8X and for full swivel and quick disconnect options, the REV 10 SXM, REV 8 SXM and ICON 8 SXM using the removable flat base mount of the TC3 swivel clamps. Mounting bolts included.

DESCRIPTION

#ADPNAUTIQUEFC5U

Nautique FC5 Upper Tower Adapters for installation of 1 pair of tower speakers in the top factory locations. CNC Machined from billet aluminum to assure a perfect OEM fit. Compatible with REV 10X, REV 8X and ICON 8X and for full swivel and quick disconnect options, the REV 10 SXM, REV 8 SXM and ICON 8 SXM using the removable flat base mount of the TC3 swivel clamps. Mounting bolts included.

DESCRIPTION

#ADPNAUTIQUEG

Nautique G Tower Adapters for installation of 1 pair of tower speakers in the top factory locations. CNC Machined from billet aluminum to assure a perfect OEM fit. Compatible with REV 10X, REV 8X and ICON 8X and for full swivel and quick disconnect options, the REV 10 SXM, REV 8 SXM and ICON 8 SXM using the removable flat base mount of the TC3 swivel clamps. Mounting bolts included.

DESCRIPTION

#ADPNAUTIQUEZ5DROP12

Nautique Drop Down Bracket For The Z5 Rack w/ 12 Inch Strut Tube (Pair)

DESCRIPTION

#ADPRETROKIT

• Retro Speaker Connection Kit System to add Neutrik connectors to REV or ICON tower speakers. This will allow you to plug directly into the tower speaker in the back, allowing a quick release plug to be plugged into the speaker.

Included in Kit:

• 2 Male Neutrick Connectors
• 2 Female Neutrick Connectors

DESCRIPTION

#ADPREVHDXB

The Wet Sounds X-Mount kit will allow you to surface mount your REV HD Series tower speakers to a surface or with specific boat adapters. Installation is easy and will require slight disassembly to install into the driver can so that you can bolt up the housing to your surface.

Included in the kit is all neccessary hardware, new internal and external housing plates, 2 pin speaker connector and replacement felt for the housing. Everything you need to make installation a breeze. X-Mount kits are available in a Black, or White Finish. Fits REV HD Models Only, Sold in Pairs.

DESCRIPTION

#ADPREVHDXW

The Wet Sounds X-Mount kit will allow you to surface mount your REV HD Series tower speakers to a surface or with specific boat adapters. Installation is easy and will require slight disassembly to install into the driver can so that you can bolt up the housing to your surface.

Included in the kit is all neccessary hardware, new internal and external housing plates, 2 pin speaker connector and replacement felt for the housing. Everything you need to make installation a breeze. X-Mount kits are available in a Black, or White Finish. Fits REV HD Models Only, Sold in Pairs.

DESCRIPTION

#ADPREVXB

The Wet Sounds X-Mount kit will allow you to surface mount your Rev, or Icon Series tower speakers to a surface or with specific boat adapters. Installation is easy and will require slight disassembly to install into the driver can so that you can bolt up the housing to your surface.

Included in the kit is all neccessary hardware, new internal and external housing plates, 2 pin speaker connector (Fits any V2 Wet Sounds Rev/Icon) and replacement felt for the housing. Everything you need to make installation a breeze. X-Mount kits are available in a Black, or White Finish. Fits REV8, REV10, and ICON8 Tower Speakers, Sold in Pairs.

DESCRIPTION

#ADPREVXW

The Wet Sounds X-Mount kit will allow you to surface mount your Rev, or Icon Series tower speakers to a surface or with specific boat adapters. Installation is easy and will require slight disassembly to install into the driver can so that you can bolt up the housing to your surface.

Included in the kit is all neccessary hardware, new internal and external housing plates, 2 pin speaker connector (Fits any V2 Wet Sounds Rev/Icon) and replacement felt for the housing. Everything you need to make installation a breeze. X-Mount kits are available in a Black, or White Finish. Fits REV8, REV10, and ICON8 Tower Speakers, Sold in Pairs.

DESCRIPTION

#ADPSPACERXB

Wet Sounds Black Spacer Bars for X-Mount REV and ICON Series Speakers (Pair).

These bars are generally used to allow the REV and ICON speakers to clear for a deck-mount or X-Mount style install.

DESCRIPTION

#ADPSPACERXW

Wet Sounds Black Spacer Bars for X-Mount REV and ICON Series Speakers (Pair).

These bars are generally used to allow the REV and ICON speakers to clear for a deck-mount or X-Mount style install.

DESCRIPTION

#ADPSUPRAFXONE

Supra FxONE Mounts are here. Easily add ICON8, REV8, or REV10 tower speakers to the 2018-Current Supra FxONE power folding tower with our CNC billet aluminum mounts. These will mount to the inner and outer factory locations on the tower with the X-Mount or Swivel Base Mount of the Swivel Clamp.

If used with the swivel mounts, rotation will be limited. For single pair applications, you’ll need 1 - FxONE Mount kit, and 1 – X-Mount Kit or Swivel Clamp Kit. If adding dual pairs of speakers, you’ll need 2 – FxONE Mount Kits, and 2 – X-Mount Kits or Swivel Clamp Kits. All Hardware is included.

Supra FxONE Upper Tower Adapter Brackets w/ Bead Blast Finish. Sold in pairs.

DESCRIPTION

#ADPTC3F

Finished in a beautiful high polish stainless steel, these ADP TC3-F clamps designed to fit tube diameters of 1 7/8" up to 3" in a "fixed" position.

Kit includes necessary hardware for mounting to your Wet Sounds REV or ICON series tower speakers including various bolts to accommodate the sizing needed.

Fits REV8, REV10, and ICON8 Tower Speakers, Sold in Pairs.

DESCRIPTION

#ADPTC3FMINI

Finished in a beautiful high polish stainless steel, these ADP TC3-F MINI clamps designed to fit tube diameters of 1" up to 1 7/8" in a "fixed" position.

Kit includes necessary hardware for mounting to your Wet Sounds REV or ICON series tower speakers including various bolts to accommodate the sizing needed.

Fits REV8, REV10, and ICON8 Tower Speakers, Sold in Pairs.

DESCRIPTION

#ADPTC3FSILVER

Finished in a smooth powder coated silver finish, these ADP TC3-F-Silver clamps designed to fit tube diameters of 1 7/8" up to 3" in a "fixed" position.

Kit includes necessary hardware for mounting to your Wet Sounds REV or ICON series tower speakers including various bolts to accommodate the sizing needed.

Fits REV8, REV10, and ICON8 Tower Speakers, Sold in Pairs.

DESCRIPTION

#ADPTC3S

Finished in a beautiful high polish stainless steel, these ADP TC3-S clamps designed to fit tube diameters of 1 7/8" up to 3".

Kit includes necessary hardware for mounting to your Wet Sounds REV or ICON series tower speakers including various bolts to accommodate the sizing needed, di-electric grease for the TC3 connector, as well as a decorative rubber boot to cover the the clamp connector when tower speakers are dismounted.

Fits REV8, REV10, and ICON8 Tower Speakers, Sold in Pairs.

DESCRIPTION

#ADPTC3S6PIN

Wet Sounds RGB LED Connector for REV & ICON Swivel Clamp Tower Speakers (6-Pin - Pair)

DESCRIPTION

#ADPTC3SMINI

Finished in a beautiful high polish stainless steel, these ADP TC3-S MINI clamps designed to fit tube diameters of 1" up to 1 7/8".

Kit includes necessary hardware for mounting to your Wet Sounds REV or ICON series tower speakers including various bolts to accommodate the sizing needed, di-electric grease for the TC3 connector, as well as a decorative rubber boot to cover the the clamp connector when tower speakers are dismounted.

Fits REV8, REV10, and ICON8 Tower Speakers, Sold in Pairs.

DESCRIPTION

#ADPTC3SXM

Finished in a beautiful high polish stainless steel, these ADP TC3-SXM surface mounts are designed for mounting on a surface or with specific boat adapters, while allowing quick and easy removal for storage or transport.

Kit includes necessary hardware for mounting to your Wet Sounds REV or ICON series tower speakers including various bolts to accommodate the sizing needed, di-electric grease for the TC3 connector, as well as a decorative rubber boot to cover the the clamp connector when tower speakers are dismounted.

Fits REV8, REV10, and ICON8 Tower Speakers, Sold in Pairs.

DOCUMENTS

There are no additional documents/resources available at this time.

SHIPPING

We offer FREE shipping on orders totalling $500+ (CAD) excluding taxes. Orders $499 and less will be charged a flat rate of $30. Orders that necessitate truck freight, exceed 150 lbs, or are too large for standard courier services are not eligible for free shipping. In such cases, we will provide a shipping estimate for your approval before dispatching any products.

Please note that our shipping services are exclusively available within Canada, covering the provinces of British Columbia, Alberta, Saskatchewan, Manitoba, Ontario, Prince Edward Island, New Brunswick, Nova Scotia, and Quebec.

Kindly be aware that shipping to Yukon, Northwest Territories, Nunavut, and Newfoundland and Labrador is currently unavailable. Estimated shipping dates/delivery times can vary, please view our complete shipping policy HERE.

RETURNS

Kindly direct all inquiries regarding returns or warranties to info@rpmperformance.ca. For a comprehensive overview of our policy, please click HERE. Inquires are not automatically approved and/or refunded. 

Returns and refunds are granted under  the following circumstances: (1) warranty or defective item, or (2) specific scenarios such as: cancellation by the buyer before fulfillment/shipping, incorrect product shipped by the seller, or inaccurate fitment/product information provided in the seller's listing.