Wet Sounds Jeep Audio Kits

DESCRIPTION

#JEEPJLLVL1C

• Adventure starts with good tunes, that’s why Wet Sounds™ developed a fully integrated pre-packaged solution for the 2018-2023 Jeep Wrangler. It has been designed and engineered for factory fit & finish and features a plug-and-play wire harness, all installation hardware and DSP tuned amplifier(s) that will provide you with the best sounding experience possible. Available in 2 options, a 1400W core kit to get your Jeep rockin’ & an 800W tower kit for a combined 2200W of power for the ultimate jeep audio setup.

Design: 

• All pieces were meticulously engineered to flow with the OE fit & styling. Mounting plates for the sub enclosure and power distro block sit nicely with factory locations. New mesh grilles for the overhead soundbar and dash provide an aesthetic, clean look to flow with the OE styling.

Mids & Highs: 

• We make ZERO compromise when it comes to high performing audio, which is why the new JEEP-JL-LVL1-C kit comes equipped with (1) pair of Zero Series™ 6.5" component mid-speakers housed in a new dash enclosure with Zero Series™ component horn tweeters for a better front sound stage and (1) pair of Zero Series™ 6x9" coaxial horn speakers for the overhead soundbar.

Bass: 

• When it comes to hitting those low notes, (2) Zero Series™ 12" 2 Ohm subwoofers deliver that extra bass you’re looking for when riding around in your Jeep. A durable roto-molded enclosure sits atop a custom mounting bracket that will bolt into the factory tie down locations in the back of your Jeep and can raise up and down, maintaining your storage space access with ease thanks to the included gas struts. Also included is a LVL control module to allow you control over how much bass you want that fits in the factory console.

Power: 

• To get the best sound, you need the best power. Included is a SYN-DX6-DSP-OE amplifier that is pre-tuned to deliver 1400W of power to your subs, mids and highs, taking the guess work of tuning so you can enjoy the right tune, all the time. Mounting is simple, with pre-drilled locations on the sub mounting plate, your amp will sit nicely tucked away out of site under the enclosure. Power distribution is handled with our Fuse Distribution Block w/ 120A mini ANL fuse, that will mount neatly under the hood with the included mounting plate.

Installation: 

• We wanted this kit to be a clean, simple solution, so we incorporated a plug-and-play factory style wiring harnesses that plug right in to your speakers, amp, distribution block, and battery saving you time and labor from cutting and terminating.

Specs:

• Compatible with 2018 - 2013 Jeep Wrangler
• Power Distribution Block: WWX-FUSE DIST BLOCK w/ 120A Mini ANL Fuse
• Component Speakers: (1) Pair ZERO 6 CS-B w/ Horn Tweeters
• Coaxial Speakers: (1) Pair ZERO 69 XZ-B
• Subwoofers: (2) ZERO 12 S2 XZ Black
• Amplifier: SYN-DX6 DSP OE Pre-Tuned Amp
• Installation Hardware: Mounting Hardware & Brackets, Grilles, Component Enclosures & Sub Enclosure
• Wiring: OE Style Harnesses for Battery, Main Power, Amplifier, Components, Tweeters, Coaxials, Subwoofers and Grounding
• Sub Control: LVL Control Module and Housing
• IF USING FACTORY RADIO: Aftermarket Amplifier Interface is Recommended.

DOCUMENTS

#JEEPJLLVL1C

There are no additional documents/resources available at this time.

SHIPPING

#JEEPJLLVL1C

We offer FREE shipping on orders totalling $500+ (CAD) excluding taxes. Orders $499 and less will be charged a flat rate of $30. Orders that necessitate truck freight, exceed 150 lbs, or are too large for standard courier services are not eligible for free shipping. In such cases, we will provide a shipping estimate for your approval before dispatching any products.

Please note that our shipping services are exclusively available within Canada, covering the provinces of British Columbia, Alberta, Saskatchewan, Manitoba, Ontario, Prince Edward Island, New Brunswick, Nova Scotia, and Quebec.

Kindly be aware that shipping to Yukon, Northwest Territories, Nunavut, and Newfoundland and Labrador is currently unavailable. Estimated shipping dates/delivery times can vary, please view our complete shipping policy HERE.

RETURNS

#JEEPJLLVL1C

Kindly direct all inquiries regarding returns or warranties to info@rpmperformance.ca. For a comprehensive overview of our policy, please click HERE. Inquires are not automatically approved and/or refunded. 

Returns and refunds are granted under  the following circumstances: (1) warranty or defective item, or (2) specific scenarios such as: cancellation by the buyer before fulfillment/shipping, incorrect product shipped by the seller, or inaccurate fitment/product information provided in the seller's listing.

DESCRIPTION

#JEEPJLLVL2T 

• Take your adventure even further with the JEEP-JL-LVL2-T kit, whether you enjoy riding around topless or with a hardtop, the Jeep Tower Kit for your 2018-2013 Jeep Wrangler hardtop is the perfect addition to our JEEP-JL-LVL1-C package. Designed and engineered for factory fit & finish and features a plug-and-play wire harness, installation mounts and hardware, (1) pair of REV 12 HD HLCD Tower Speakers with XZ-B grilles and TC3-SXM mounting clamps with a SYN-DX4-DSP-OE pre-tuned amplifier that will provide you with the best sounding experience possible for 800W of clean & loud sound.

Design: 

• All pieces were meticulously engineered to flow with the OE fit & styling. Mounting plates for the tower speakers sit nicely in factory locations. With the included TC3-SXM mounts, you can easily adjust your speaker’s direction, or simply remove for storage or heavy trail riding to avoid damage.

Tower Speakers: 

• The Revolution-HD series adds an even higher level of high-definition performance to the audio industry, bringing unprecedented volume and sound quality to a tower speaker design never achieved before. Built upon the success of the Revolution Series, we developed a new REV TEC™ driver using proprietary materials to provide amazing mid-bass with a smooth yet powerful high frequency response. The REV HD Horn Loaded Compression Driver (HLCD) Tower Speakers have been optimized with audio clarity and high performance at their core. They both feature a Pro-Axial HLCD driver paired with an advanced polymer composite cone for audio clarity and durability. The thermoformed Santoprene™ rubber surround, matched with the injection molded reinforced enclosure, ensures optimal listening in any marine setting. The integrated RGB lighting rings and badge add a nice touch of style, perfect for ambient lighting on the trails.

Power: 

• To get the best sound, you need the best power. Included is a SYN-DX4-DSP-OE amplifier that is pre-tuned to deliver 800W of power to your REV 12 HD tower speakers, eliminating the need for any tuning or adjustment of the amplifier. Mounting is simple, with pre-drilled locations on the sub mounting plate next to core kit amp, your amp will sit nicely tucked away out of site under the enclosure. Also included is a 100A mini ANL fuse for your WWX-FUSE DIST BLOCK under the hood.

Installation: 

• We wanted this kit to be a clean, simple solution, so we incorporated a plug-and-play factory style wiring harnesses that plug right in to your speakers, amp, distribution block, and battery saving you time and labor from cutting and terminating. RGB lighting for the towers is built into the harness and controlled thru the ZENGGE app, available on google play and apple app store.

Specs:

• Compatible with 2018 - 2013 Jeep Wrangler
• Tower Speakers: (1) Pair REV HD Series 12" HLCD Tower Speakers w/ XZ-B Grilles
• Amplifier: SYN-DX4 DSP OE Pre-Tuned Amp
• Installation Hardware: Mounting Hardware, Tower Brackets and TC3-SXM Tower Mounts
• Wiring: OE Style Harnesses for Battery, Main Power, Amplifier, Tower Speakers, RGB Lighting and Grounding
• Tower Audio Control: LVL Control Module Harness

DOCUMENTS

#JEEPJLLVL2T

There are no additional documents/resources available at this time.

SHIPPING

#JEEPJLLVL2T

We offer FREE shipping on orders totalling $500+ (CAD) excluding taxes. Orders $499 and less will be charged a flat rate of $30. Orders that necessitate truck freight, exceed 150 lbs, or are too large for standard courier services are not eligible for free shipping. In such cases, we will provide a shipping estimate for your approval before dispatching any products.

Please note that our shipping services are exclusively available within Canada, covering the provinces of British Columbia, Alberta, Saskatchewan, Manitoba, Ontario, Prince Edward Island, New Brunswick, Nova Scotia, and Quebec.

Kindly be aware that shipping to Yukon, Northwest Territories, Nunavut, and Newfoundland and Labrador is currently unavailable. Estimated shipping dates/delivery times can vary, please view our complete shipping policy HERE.

RETURNS

#JEEPJLLVL2T

Kindly direct all inquiries regarding returns or warranties to info@rpmperformance.ca. For a comprehensive overview of our policy, please click HERE. Inquires are not automatically approved and/or refunded. 

Returns and refunds are granted under  the following circumstances: (1) warranty or defective item, or (2) specific scenarios such as: cancellation by the buyer before fulfillment/shipping, incorrect product shipped by the seller, or inaccurate fitment/product information provided in the seller's listing.