Arc Audio MOTO Series Amplifier (4 x 150W RMS - Class D 4-Channel)

DESCRIPTION

MOTO720

The MOTO720 amplifier delivers more power and features than the compact HD motorcycle-specific chassis of the legendary MOTO600.4. While it carries the MOTO category name, many ARC Audio dealers find the compact 8.125 by 5.5-inch footprint ideal for under-seat in exotic cars and behind-seat installations in trucks.

The MOTO720 delivers an impressive 720 watts of power across its four output channels and up to 360 watts when bridged to a single four-ohm speaker. The Load Select switch adjacent to each speaker connection plug allows installers to optimize the power production capabilities for each installation. This flexibility is ideal for side-by-side and automotive applications that use front speakers that need full power at four ohms and a subwoofer that presents a bridged four-ohm load. New speaker terminal blocks integrated to the amplifier chassis replace the removable connectors on the MOTO600.4 to deliver solid and reliable power delivery in even the harshest of conditions.

The MOTO720 also incorporates a unique microprocessor design that monitors the operation and health of the amplifier across multiple zones. In the event of an issue, the onboard microprocessor will flash a sequence of lights displaying a unique code to identify faults in the installation or system component failure such as a damaged speaker or short-circuited speaker cable. An internal fan is controlled by the microprocessor to ensure the amplifier stays cool and sounds great in even the hottest of weather conditions and volume levels.

While the amp isn’t considered "waterproof", the main circuit board of the MOTO720 has two conformal coating layers to prevent damage in high-humidity installations and possible water from events like riding in the rain. The accent panel on the top of the amp has been enlarged to cover the top cover panel gaps, and all of the panel gaps have been tightened to reduce the chance of water drips from getting into the amp. Finally, the upgraded speaker connections blocks feature a sealed design that routes any moisture that enters from the top away from the circuit board. These key design features help make the MOTO720 an ideal option for Motorcycle, Marine, Powersports and Automotive installations alike.

SPECIFICATIONS

Features:

• Multi-Channel Amplifier (Four-Channels)
• Microprocessor Class-D Design.
• Designed And Engineered By Robert Zeff.
• High-Frequency Power Supply Design For Improved Signal Transparency And Overall Sound Quality.
• Built-In Internal Fan For Additional Cooling
• Microprocessor Controlled Auto Sense Turn-On Technology (DC, Signal, Hard Trigger selections)
• Full-Range Amplifier Design
• PP Coated And Treated Design Components For The Highest Level Of Environmental Protection
• Single Side Plug And Play (PNP) Connection Design.
• Water Tight Direct Connect Speaker Terminals.
• Balanced Differential Signal Input Design.
• Audiophile Class-D Output Filter Networks.
• Detailed Microprocessor Controlled Protection.
• Large, High-Frequency Switching Power Supplies.
• Differential Inputs allow for RCA and Speaker level inputs (Switch Selectable)
• Fault Codes Storage Of The Last Protection Code Detected
• High Signal To Noise Ratio Without Compromising Power Output.
• Fully Balanced Input Stage Significantly Increases Flexibility
• Ultra Low ESR, High Capacity Power Supply Storage capacitors.
• Bridged Mode Auto Detect Turn-On Works With Most Chip Based OEM Head units.
• Precision Filtering Isolates The Power supply Reducing Unwanted Interference In Radio Reception

 Specs:

• 4-Channels @ 4 Ohms: 150 Watts
• 4-Channels @ 2 Ohms: 180 Watts
• 2-Channel @ 4 Ohms (Bridged): 360 Watts
• 2-Channel @ 2-Ohms (Bridge): Not Recommended
• Frequency Response: 10Hz - 20kHz
• Crossover Range: 50Hz - 550Hz
• Bass Boost: No
• Remote Level Control Included: No
• Input Sensitivity (Low): 200mV - 3.5V
• Built in Fan Cooling: Yes
• Signal Input Connection Type: Pigtail (PNP) Harness
• Pigtail Harness Included: Yes, RCA harness included
• Signal Input Connection compatibility: Direct connection to RCA Harness, PSM or MPAK wire harness kit
• Fitment compatibility: Aftermarket & Direct fit to OEM AMP locations on 2014 Streetglide and 2015+ Roadglides
• Dimensions: 8.125" (L) x 5.43" (W) x 1.8" (H)

DOCUMENTS/RESOURCES

There are no additional documents/resources available at this time. 

SHIPPING

We offer FREE shipping on orders totalling $500+ (CAD) excluding taxes. Orders $499 and less will be charged a flat rate of $30. Orders that necessitate truck freight, exceed 150 lbs, or are too large for standard courier services are not eligible for free shipping. In such cases, we will provide a shipping estimate for your approval before dispatching any products. 

Please note that our shipping services are exclusively available within Canada, covering the provinces of British Columbia, Alberta, Saskatchewan, Manitoba, Ontario, Prince Edward Island, New Brunswick, Nova Scotia, and Quebec.

Kindly be aware that shipping to Yukon, Northwest Territories, Nunavut, and Newfoundland and Labrador is currently unavailable. Estimated shipping dates/delivery times can vary, please view our complete shipping policy HERE.

RETURNS

Kindly direct all inquiries regarding returns or warranties to info@rpmperformance.ca. For a comprehensive overview of our policy, please click HERE. Inquires are not automatically approved and/or refunded. 

Returns and refunds are granted under  the following circumstances: (1) warranty or defective item, or (2) specific scenarios such as: cancellation by the buyer before fulfillment/shipping, incorrect product shipped by the seller, or inaccurate fitment/product information provided in the seller's listing.